Zepro ZHZ 500-850, Инструкция по установке

Страница: 79 / 82

Specifications
79 www.zepro.com
Fig 74. Maximum power consumption – Minimum
recommended conductor cross sectional area
-
+
-
+
L
L
U
min
I
min
I
min
U
min
13.4 Maximum power consumption – Minimum recommended conductor
cross sectional area
190 bar
13.5 Battery maintenance
When storing for longer than 1 week, you are recommended to disconnect the lift from the bat-
tery via the main switch or by releasing the lift’s main fuse, in order to reduce the risk of the bat-
tery discharging. The length of time the vehicle can be stored without the battery’s charge level
becoming too low depends on the condition of the battery, the charge level prior to storage and
how much power the vehicle’s other components take from the battery. After a period of storage,
the battery must always be charged fully before operating the lift.
When installing the lift and when carrying out servicing and repair work, when the lift is operated
repeatedly without the vehicle being started and used, a battery charger must be used between
operations to maintain the battery’s charge level.
The battery charger must not be connected when operating the lift. Risk of damage.
NOTE.
Ensure that the lift has
access to the minimum
recommended power
capacity (I
min
)
.
Some
vehicle models have
restrictions regarding
the amount of power the
lift can access from the
existing battery.
NOTE.
12 volt 24 volt
Pump – Motor unit 110 A 60 A
Magnet (hydr. unit) 1.4 A 0.7 A
Magnet (electrical hose rupture valve) 1.5 A 0.75 A
Solenoid 1.8 A 0.9 A
Minimum recommended conductor cross sectional area
(copper cables, positive and negative cables)
Control cable 1.5 mm
2
1.5 mm
2
Supply line, L < 8 m 35 mm
2
35 mm
2
Supply line, L = 8-15m 35 mm
2
35 mm
2
Supply line, L > 15 m - 35 mm
2
Battery
Min. capacity, I
min
140 Ah 110 Ah
Min. voltage during operation, U
min
(when lifting)
9 volt 18 volt