Zepro Z 2500-130 Series, Руководство по установке

Страница: 65 / 80

Z 2500-130/150 Connection unit
65 www.zepro.com
Fault codes
Identification Code 1 Code 2 Code
3
Information Other
L
Low battery voltage
07-35 Voltage measured
H
High battery voltage
07-35 Voltage measured
E
Control device
locked
1
Fixed control device 1 (incl. two-hand
button 2h1 if they are monitored)
B
C
E X
In
Out
2
Fixed control device 2 (incl. two-hand
button 2h2 if they are monitored)
3 Radio control device, external
4 Coil control device
5 Truck slider control device
6 Radio control device, internal module
7 CS (cabin switch)
Segment
Segments B, C, E or X are illumi-
nated depending on which button
signal has locked the control device.
F
Output short-circuit-
ed/high current
0-9
Which output has short-circuited/
has high current.
1-7 Control device,
displayed only
after the re-
spective output/
function has
been active.
8 Control power
9 Sensor power
Output not connect-
ed/cable breakdown
0-7
Which output is not connected/
has cable breakdown.
Displayed only af-
ter the respective
output/function has
been active.
A
Internal fault
0-
Contact support
if the lift does not
function.