Zepro Tail lift Скачать руководство пользователя

Страница: 91 / 92

Declaration of conformity during assembly

Declaration of conformity during assembly

The installer hereby declares/assures under his sole responsibility that the tail lift has been

fitted in accordance with ZEPRO’s instructions and that the assembly/delivery checks have

been carried out. The vehicle manufacturer’s instructions were also taken into account

when building the superstructure.

Because ZEPRO’s installation instructions have been followed and any modifications are

approved by ZEPRO,

this document constitutes confirmation that the tail lift and its installa

tion are in compliance with the following directives.

Machinery Directive 2006/42/EG

The installer hereby certifies that:

- installation was carried out according to ZEPRO’s instructions

- installation/delivery inspections have been performed

................................................................ ................................................................

Installer's signature

Date

................................................................

Serial number (manufacturing number)

See the type plate located on the tail lift frame.

Paste the enclosed copy of the type plate on the
back of the owner's manual.

Certificate of registration, delivery card

The delivery card must be registered in C-Care for the warranty to be valid.

The superstructure builder is responsible for registering the delivery card in C-Care (ww

w.c-office.com). User name and password are required to log in. There is no need to file

the attached paper copy of the delivery card supplied with the tail lift documentation after

registration in C-Care.

This is to certify that the delivery card is registered in C-Care:

................................................................ ................................................................

Superstructure builder (Company)

Date

Company details/stamp

Содержание Tail lift





























































































Результаты поиска

Содержание Tail lift

Отзывы:

Похожие инструкции для Tail lift

Бренды по названию

Популярные бренды

Zepro Tail lift, Руководство пользователя

Результаты поиска

Содержание Tail lift

Отзывы:

Похожие инструкции для Tail lift

Бренды по названию

Популярные бренды