5
When using electrical appliances, basic safety precautions
should always be followed, including the following:
WARNING
-
To reduce the risk of electrical shock, fire or
injury:
•
Use only as described in this manual.
•
Use only a 120-volt outlet with a polarized receptacle.
•
The Zephyr has a polarized plug (one blade is wider than
the other), this plug will fit in a polarized outlet only one
way. Initially, if the plug does not fit into the outlet, reverse
it. If it still does not fit, contact a qualified electrician or
Zephyr service center.
•
Do not use the air purifier if the power cord or plug is
damaged or the connection to the wall outlet is loose.
•
When removing the power plug, always hold the plug and
never pull by the cord. Do not handle plug or appliance
with wet hands.
Electrical shock and/or fire from short
circuit may occur.
•
Remove the power plug from the wall outlet before cleaning
the unit and when not using the unit. Turn off all controls
before unplugging.
•
If the power cord is damaged, it must be replaced by the
manufacturer, or an authorized service agent at a authorized
Zephyr service center.
•
Do not insert fingers or foreign objects into the intake or air
outlet.
•
The batteries must be removed from the remote control
before disposal, and the batteries must be disposed of
safely.
•
Keep hair, loose clothing, fingers and all parts of the body
away from openings and moving parts at all times.
•
Do not use appliance in an enclosed space where oxygen,
flammable, explosive or toxic vapors are given off by oil
base paint, paint thinner, some mothproofing substances,
or in an area where flammable dust is present.
Important Safety Instructions
6
Precautions Concerning Operation
•
Do not block the air intake or air outlet.
•
Do not use the unit near or on hot objects, such as ranges or
where it may come into contact with steam.
•
Do not use the unit on its side.
•
Do not operate the unit without filters.
•
Do not wash and reuse HEPA, Activated Carbon or
Photocatalyst filters.
•
Do not clean outside with paint thinner or any chemicals.
The unit surface may become damaged or may cause fire.
Components and Control Panel
