3
How it Works
The Zephyr functions as an air cleaner by helping to remove
airborne particles, chemicals and microorganisms from the air.
The centrifugal fan of the Zephyr draws air through side panels
(Intake) located on each side of the machine. The air then
passes through the Pre-filter, HEPA filter, Activated Carbon Fil-
ter, Vitamin C filter, Photocatalyst filter, UV sterilization lights,
and Plasma Generator. The clean / purified air is then released
through the outlet on the top of the unit.
Functions and Features
Pre Filter:
Designed to stop and remove larger particles from the air. No
replacement necessary, recommended cleaning every 1 - 2
months by vacuuming.
HEPA filter:
Designed to remove up to 99.97% of airborne particulates such
as dust, pollen and other biological contaminants down to 0.3
microns.
Activated Carbon Filter:
Absorbs harmful VOC’s and odors, helping eliminate them from
the air.
Vitamin C filter:
Releases vitamin C into the air which has many benefits
including: strengthening the immune system, helping to
prevent illness, and improvements to overall health.
Photo Catalyst filter:
Helps remove Volatile Organic Compounds (VOC’s),
Chemicals, Gases and Pathogens from the air.
UV Sterilization Lights:
Two (2) UV lights are designed to help kill viruses, bacteria,
mold spores and micro-organisms and help remove them from
the air.
8
2. Auto Setting
The Auto function button is located on the remote. By
touching it once, it will turn the Zephyr to its auto setting
and the will illuminate on the display panel. Sensors
will detect and measure dust and VOC levels in
the air. The VOC
on the LED display
indicates VOC levels from 0-6. As each two indicators
increase so will the Zephyrs fan speed to eliminate the
contaminants from the air. The sign on
the LED indicates dust levels in the air from 0-6.
As dust levels increase so will the fan speed for every
two bars. The sensors are only activated when the
system is set on the auto setting.
3. Timer Setting
Press the Timer button once and use the “+” or “
-
”
buttons to select the desired time. To set the time
simply touch the Timer button again and the selected
time will stop flashing and begin countdown.
4. Sleep Mode
Sleep mode dims the display panel and lowers the fan
speed so it is nearly silent. By touching the Sleep
button once, it will activate the function. To cancel,
simply touch again.
5. The Power, Fan Speed and UV/Plasma Generator buttons
work the same as on the control panel.
