23
Trapeze Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Maintenance
Removing the Grease Filter (FIG. J)
1. Push grease filter away from center of hood using handles.
2. Pivot back of filter downward.
3. Remove filter by pulling down and away from the hood.
Handles
1
2
FIG. J
Swivel LumiLight LED
In the unlikely event that your swivel LumiLight LED fails, please contact Zephyr to order replacement
parts. See the list of parts and accessories page for part numbers and contact information.
LED Removal (FIG. K)
1. Remove grease filters.
2. (If applicable) remove both side spacer panels
by 2 screws for each spacer panel.
3. Remove screws on light panel.
4. Disconnect LED light quick connector.
5. Remove (2) screws from the sides per LED light.
6. Push LED light through the light panel opening.
FIG. K
