Zephyr Tornado Glo, Инструкция по использованию, уходу и установке

Страница: 26 / 60

26 Tornado Glo Use, Care, and Installation Guide
TO R N A D O G LO
I N S E R T
C O R E
Troubleshooting
The insert is not
venting out properly. Using the wrong size of ducting. Change the ducting to the correct size
The insert might be hanging to
high from the cook top. Adjust the distance between the cooktop
and the bottom of the insert within 24”
to 36” for gas cooktops and 20” to 36”
for electric cooktops.
The wind from the opened
windows or opened doors in the
surrounding area are affecting
the ventilation of the insert. Close all the windows and doors to
eliminate the outside wind flow.
Blockage in the duct opening or
ductwork. Remove all the blocking from the duct
work or duct opening.
Filter is vibrating. Filter is loose. Adjust or change the filter.
Spring clip is broken on the filter. Change the spring clip.
RF Remote control
does not work. Battery is dead. Replace battery with type A23 12v.
Poor communication with the
insert. Remote control must be within 15 ft of
insert.
RF Remote lost communication
with the insert. Reset liner and remote by switching
power off at the circuit breaker for 5
minutes. Place remote on counter top
near the insert and switch the circuit
breaker back on.
Possible Problem Possible Cause Solutions