Zephyr ES1-E30AB, Инструкция по использованию, уходу и установке

Страница: 10 / 13

- 10 -
To remove the blower wheel, first
take off its intake ring. Then remove
the blower wheel by pulling it down
smoothly.
HD0156
D
Do:
• Regularly wash surfaces with clean
cloth or rag soaked with warm water
and mild soap or liquid dish detergent.
• Always clean in the direction of original
polish lines.
• Always rinse well with clear water (2 or 3
times) after cleaning. Wipe completely dry.
• You may also use a specialized
household stainless steel cleaner.
Don’t:
• Do not use any steel or stainless steel
wool or any other scrapers to remove
stubborn dirt.
• Do not use any harsh or abrasive
cleansers.
• Do not allow dirt to accumulate.
• Do not let plaster dust or any other
construction residues reach the hood.
During construction or renovation,cover
the hood to make sure no dust adheres
to stainless steel surface.
S
TAINLESS STEEL CLEANING
:
NOTE: Do not try to remove the black part ( C ) attached to the bottompanel.
When reinstalling the blower wheel, make sure the small tab ( D ) will fit into one hole of the motor.
10. CLEANING
(CONT’D)
Avoid: when choosing a detergent
- Any cleaners that contain bleach will attack stainless steel.
- Any products containing: chloride , fluoride , iodide , bromide will deteriorate surfaces rapidly.
- Any combustible products used for cleaning such as acetone , alcohol , ether , benzol ,
etc., are highly explosive and should never be used close to a range.
E
NAMEL FINISH
:
Clean with warm water and mild detergent only. If discoloration occurs, use a good enamel
polish such as automotive polish. (DO NOT use rough abrasive cleaner or porcelain cleaner.)
C