Zephyr AK7000AS, Инструкция по использованию, уходу и установке

Страница: 17 / 23

15
Accessory Installation –
Heat Lamp Kit
1. Remove nuts from each of the (4) screws
around the bottom panel. Remove bottom
panel.
2. Replace bottom panel with heat lamp bottom
panel. Re-attach screws and nuts.
3. Place heat lamp housings over the (4) pre-
threaded screw posts inside the hood. Attach
with screws provided.
4. Install heat lamp wire cover over wire from heat
lamp housing and screw shut. Repeat for each
heat lamp housing.
5. Plug heat lamp wire from hood into wire from
heat lamp housing.
6. Install heat lamp bulbs and operate heat lamps
using rocker switches located in each corner
behind the halogen bulbs.
HEAT LAMP KIT INSTALLATION*
*IMPORTANT: Dual blower and heat lamps may only be used together in 36” and 42” models.
30” models will only accommodate one or the other, not both at the same time.
Rocker Switches