Zephyr AK7000AS, Инструкция по использованию, уходу и установке

Страница: 13 / 23

11
This range hood is equipped standard with a 6” round vertical duct option. To convert from 6” round vertical to
3-1/4” x 10” horizontal ducting please following the instructions below.
NOTE: Horizontal ducting is only available for the single internal blower.
VERTICAL TO HORIZONTAL DUCTING CONVERSION
1. Disconnect blower wire.
2. Remove support screw from top of hood near
the back. Remove 2 screws holding blower plate
to hood and pull blower towards front of hood to
release from internal bracket.
3. Unscrew (4) screws holding blower to blower
plate and remove blower.
4. Cover round blower opening on blower plate
with 6” round metal cap. Attach with (3) 3.5x8
screws.
5. Re-attach blower plate to hood by following
removal instructions in reverse.
Installation –
Horizontal Conversion