Zephir ZUW12000, Руководство пользователя

Страница: 53 / 64

INSTALLATION MANUAL
Air conditioners are units that should have the professional technicians do the installation for you. This Instruction Guide
is the universal-purpose version for the models of split wall-mounted air conditioners manufactured by our Co. The
appearance of the units that you purchase might be slightly different from the ones described in the Guide, but it does
not affect your proper operations and usage. Please read carefully the sections corresponding to the specific model you
choose, and keep the Guide properly so as to facilitate your reference at later time.
SAFETY PRECAUTIONS
Read the precautions in this manual carefully before operating the unit.
This appliance is filled with R32 refrigerant.
1.
Air conditioner must be connected to proper electrical outlet or breaker with the correct electrical supply. And only the
specified power can be used.
2. Proper grounding must be ensured to reduce the risk of shock and fire.
3. Do Not cut or remove the grounding prong. If you do not have a three-prong electric receptacle outlet or breaker in
the wall, have a certified electrician install the proper receptacle or breaker. The wall receptacle or breaker MUST be
properly grounded.
4. Do Not use if power cord is frayed or otherwise damaged. Also avoid using it if there are cracks or abrasion damage
along the length, plug or connector.
5. Do Not use an adapter or an extension cord.
6. Do Not block airflow inside or outside the air conditioner with blinds, drapes, protective, covers, shrubs or blusher.
7. Be careful of sharp edges on the front and rear fins of the unit that could cut and cause serious injury.
8. Be careful when lifting the air conditioner to install or remove the unit. Always use two or more people for this.
9. Always cut off the power of air conditioner before servicing it or moving it.
10. In some type of units, there is no appropriate plug corresponding to its power cord because of power, Under this
condition, an appropriate power breaker should be linked to its power cord, therefore, the instruction part associated
with plug using is not available for these types.
11. An all-pole disconnection switch having a contact separation of at least 3mm in all poles should be connected in fixed
wiring.
12. The appliance shall be installed in accordance with national wiring regulations.
13. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do
not play with the appliance.
14. If refrigerant gas leaks during installation, ventilate the area immediately. Toxic gas may be produced if the
refrigerant comes into contact with fire.
15. After completing installation, check for refrigerant gas leakage.Toxic gas may be produced if the refrigerant gas leaks
into the room and comes into contact with a source of fire, such as a fan heater, stove or cooker.
16. Install personnel and air conditioners to eliminate static electricity during air conditioning installation.