Zephir ZUW12000, Руководство пользователя

Страница: 34 / 64

What if connection failed
When the connection failed, you could see the the App interface as shown in the screenshot below. Please try to
configure network again or switch to AP mode.
Continue to connect by switching other connection mode.
1. Tap on [AP mode], configure network via AP mode with the following procedures.
2. Switch Air conditioner to AP mode: When it is under smart mode, long press
reset ‐ button for 5 seconds ‐ buzzer sounds
－
the heating icon on device is slowly flashing (approx. 1.5 times/s). It
indicates the Air conditioner has entered into AP mode.
3. Connect to device hotspot: Tap on [Connect] (open phone settings ‐ WLAN), connect to the hotspot named
“SmartLife ‐ XXXX” (The name of WIFI may vary, depending on the actual product), then the network configuration
starts as shown in the screenshot.
4. After successful network configuration, tap on “Done” and the device list interface appears.