Zephir ZRP12000CB, Руководство пользователя

Страница: 37 / 44

●
Please remove the air exhaust hose, connect a drain hose to the drain hole and lead the water to the outside in
order to intensify dehumidifying capacity.
※
When the water tank is full,"E2" will be displayed on the display panel. Please remove the rubber cap “B” of the drain
hole to drain out the water first. After the drainage is completed, please restart the unit and then the unit can operate
normally.
POWER SUPPLY
1. Confirm the correct power.
2. Insert the plug into the outlet firmly In order to prevent any dangerous leakage.
3. Don’t pull power wire by force because it will cause damage to power wire.
PLACE FOR USE
1. Because the machine distributes hot air, please don’t place or operate in a narrow place
2. In case of dangerous leak, don’t work the machine in a humid place
3. Don’t place the machine in a sunlit corner otherwise the unit might shut down due to the overheat and the color of
the machine may soon fade out.
HELPFUL HINTS
The unit is fitted with a special thermal cut off device. Please ensure the unit is not placed against objects which will
obstruct air intake e.g. furniture or curtains as this will affect its performance dramatically.
EXHAUST HOSE INSTALL
1. Circumrotate the exhaust hose according to the direction
as the arrowhead
①
indicates and then the exhaust hose
can be took out from the unit.
2. Circumrotate the exhaust hose according to the direction
as the arrowhead
②
indicates and then make it connect
with
the unit.
WINDOW KIT INSTALL