Zephir ZMW1900B, Инструкция по эксплуатации

Страница: 25 / 31

Note: Press the one time, increasing 10 minutes.
Press to set the working period each day.
Note:
In order to distinguish between setting current day & working period of the day:
Current day - Monday-Sunday: 1~7
Working period - eachday:P1~P5
Turn-off time must be later than turn-on time. When turn-on time is same as turn-off time, the
unit will be in standby mode.

Repeat the above steps, you can set the whole weekly program (& Each day, the work of
each
segment opens, the time of shutdown and the temperature).

To cancel the weekly function, press the " " again, the icon "" on the screen will go off.
The weekly programs off. The unit will revert to the previous working status.
Note:
-After the above setting are completed and weekly program is working, press
to check the setting time of eachday, time periods and setting temperature;
- The turn-on time periods 0~24hours; minutes:10 minutes each ;
-The “TIME/OFF” cannot be less than “TIME/ON”;
- Setting temperature must be 4
℃
higher than the current temperature in order to make heating.
-When the “TIME/ON” is the same as “TIME/OFF”, the time period enter into standby mode;
If main switch off ,power cut off, or plug out, it need reset .
Set open-window detection(ONLY by remote control)
：
1) . Press“ “
，
the product enter into working status. Heating for a
moment tostable.
2) . Press” ” by remote control, icon “ “ displays on the screen,
The temperature display”23
℃
”by default. Press” / “to set
target temperature. See Figure S