Zephir ZMW1900B, Инструкция по эксплуатации

Страница: 22 / 31

3. Press” “ button to set timer(1-12hours). Pressing the buttonone time increasesone hour for
timer. After setting time, the display will show current setting time for 5 seconds, then resume to
previous display. i.e. Setting timer of 8hours (Figure D). Figure E is the photo of the previous
display.
4. Appointment “ON”
In standby mode, press button, you can set the appointment turn-on time in 1-12 hours.
After complete setting, the display shows the appointment turn-on time. The display automatically
decreases 1 hour for each hour passed. When the appointment power-on time arrived, the
product will automatically turns on. The default setting temperature is 25
℃
duringappointment
turn-on. Below photo is an example to set appointment turn-on time to 3 hours:
Note: If not setting the temperature and weekly program, the unit will automatically turn-off after
continuous working 12 hours, and enter into standby.
Function operation (ONLY by remote control)
Note: During the operation, please make sure the remote transmitter aim at the remote receiving
area of the product

Press button one time, switch on the unit and fan blowing, display as the Figure G:
Note: Press the button again to power off the unit.

Press button for one time, the product works with low heating(1000W) and display