Zephir ZMW1900B, Инструкция по эксплуатации

Страница: 23 / 31

shows as Figure H.

Press again, changes to high heating(2000W) and display shows as Figure J.

Press third time, heating switch off, only fan blowing, see Figure K.

The timer of remote control same as the timer button of the unit body.
Set current TIME/DAY (can set both under standby mode &working status):
Press button for one time, the display shows hour ,press to
set current hour(total 24hours); press again, the display shows minute , press
to set current minute, then press for third time, the display shows the day , press
to set current day (Monday-Sunday: 1-7) . Then press” “ to confirm
The setting, the display will show the current settings.
For example: Setting to Friday 8:30 AM ,please refer to the Figure L
Note: Above setting Time/Day will keep as long as switch on or stand by. If main switch off or
power cut off, or plug out, it need reset .You can press to check you set current Time /Day.
Set temperature
During working status, Press / the display shows ” 20
℃
“ as default. Press” / “
to set desired temperature (temperature range 10-49
℃
), press” “ to confirm the setting.
For example: The current room temperature is 15
℃
, when set temperature to 25
℃
,the display
shows as Figure M.