More information and FAQ on:
www.zepcam.com
T3 Live_IM-EN-2.0.X
13
How to mount the T3 Minicamera
How to use the T3 Minicamera
1. Select the appropriate mount for the specifi c type of use
2. Place the nut in the appropriate side
3. Use the Allen key to tighten the bolt to obtain a suitable friction in movement
4. Place the mount on the surface or clothing
5. For helmet use, use cable guiding to prevent cable damage due to bending
1. Once the T3 Minicamera is connected and the bodycam is on in standby, the T3 Live Bodycam
will only use the sensor of the T3 Minicamera
2. To use the sensor of the T3 Live Bodycam again, switch off the T3 Live Bodycam, disconnect
the T3 Minicamera and switch the power of the T3 Live Bodycam back on
3. The LED on the T3 Minicamera shows green when the T3 Live Bodycam is in turned on and in
standby mode
4. The LED on the T3 Minicamera shows red when the T3 Live Bodycam is recording
5. In low-light conditions, the T3 Live Bodycam switches the video settings to Black & White auto-
matically
6. In low-light conditions, the built-in infrared illuminator turns on to produce additional scene
lighting
