7
③
Strictly prohibit to clean the slicing knife before cutting off the electric power.
6). When finished cleaning, start the machine and let it run for 3 minutes cutting
nothing, make sure that it could work normally.
B. To make sure this product could work long enough, you must maintain it
termly:
1). The rotary and slip parts should be kept lubricative and agile. Please check and
add lubricant to the parts termly, make sure they could work normally long enough.
2). maintain the slicing knife
1
The slicing knife is made of high intensity steels; it should not be impinged by
hard articles.
②
When finished using the product, please wipe the slicing knife up with a piece
of dry cloth.
③
Use a piece of dry cloth with edible oil to wipe the edge of the slicing knife for
one time each day. This is to prevent the slicing knife not to rust.
3). The lubricating to the slip axle of the food pressing board.
1
se a piece of cloth to wipe the slip axle up.
2
Add some edible oil to the slip axle, move the food pressing board up and
down to let the edible oil full penetration, till the food pressing board can be
moved agilely.
③
Do this for one time each day before using the product.
4). The lubricating to the sliding part axle of the food carrier.
Add lubricating oil (SAE140 lubricating oil) onto the sliding part axle, move
the food carrier right-and-left to let lubricating oil full penetration, till the
food carrier can be moved agilely. Do this each time for a week.
5). Fully automatic gearing's maintenance
Check termly whether the screws of the gearing have become loose or not, whether
the lubricating parts have been frayed or burned or not. Reinforce the loosed
screws and add lubricating oil (SAE140 lubricating oil) on time. It is requested to
do this one time each week.
6). Maintain the knife grinding parts
①
Each time before grinding the knife, check whether the axle of grinding wheel
is retractile or not.
②
Each time before grinding the knife, check whether the grinding wheel can run
