Zenty ZT-111, Руководство пользователя

Страница: 9 / 31

(844) 200-1945 | sales@zenty.com Page 9 of 31 Copyright © Zenty AV
3). How to connect the IR Cable
When connecting point to point, no need to configure TX and RX.
When connecting point to many, many to point and many to many, please make sure every TX and
RX has unique IP and MAC address, every TX has unique group ID.
This over IP Extender has been assigned unique default MAC address for every TX and RX, so you
don’t have to set the MAC for the units.
You just need to set the IP address and Group ID following bellowing steps.
A). DHCP (Dynamic host configuration protocol)
If you are using a Switch that supports DHCP, please enable DHCP so that the Switch will assign a
unique IP for TX and RX, and you don’t need to change the IP for the unit’s manual.