Q
Q
Q
QUICK SETUP GUIDE
UICK SETUP GUIDE
UICK SETUP GUIDE
UICK SETUP GUIDE
Zensol Automation Inc.
www.zensol.com
23
Step 5h – Executing a test
You are now ready to make data acquisitions.
To launch a test, all you need to do is to click on the icon
. In the shown example, the test launched would
be +8’.
If you have configured your tests with the TRIG, once the test is launched, you can change taps on your tap
changer when you see the “Measure” LED light up on the front panel of the TAP-4.
Then, you can simply change tests with the blue arrows and click again on this icon
.
Once you will be used with the testing sequence, you can use the batch button
. It can execute all the
tests automatically while you only have to change taps when the hardware is ready.
