20
Troubleshooting
Problem
Possible Reason
Corrective Action
ePruner Will Not Start
Battery dead
Charge Battery
Battery not connected
Connect battery
Safety switch cannot be
initiated
Open by initiating safety
on switch
On / off switch failure
Send to repair service
center
Intermittent Operation
Loose internal connections
Send to repair service
center
On / off switch failure
Hot Blades
Blade dull
Sharpen or replace the
blade
Blade gap
Sharpen or replace the
blade
Poor lubrication, resulting
in excessive friction
Lubricate blade
Poor Trimming
Performance
Lubrication is not in place,
resulting in excessive
friction
Lubricate blade
Dirty blade
Clean blade
Blade dull
Sharpen or replace the
blade
Trimming technique is
poor
Read the
instructions carefully
The battery is not fully
charged
Charge the battery
Will not charge. Charger
red light flashes.
The battery is not properly
placed in the charger
Insert the battery correctly
The battery charger is not
connected properly to the
power supply
Connect properly
Battery contact point is
dirty
Clean
Invalid battery
Replace battery
Battery charger is invalid
Replace Battery Charger
