manualshive.com logo in svg
background image

GB-2

PSJ2310

This pole-mounted powered pruner (hereafter called pruner) is designed especially for tree service 
by a trained operator. For safe operation, you must read and understand this owner's manual com-
pletely before operating the pruner. 
Note: Illustrations and specifications in this manual may vary according to requirements of individual 
countries and are subject to change without notice by the manufacturer.

1. Parts location

 SAFETY FIRST

Instructions  contained  in  warnings  within  this  manual  marked 
with a   symbol concern critical points which must be taken into 
consideration to prevent possible serious bodily injury, and for 
this reason you are requested to read all such instructions care-
fully and follow them without fail.

WARNINGS IN THE MANUAL

 WARNING

This mark indicates instructions, which must be followed in order 
to prevent accidents, which could lead to serious bodily injury 
or death.

 IMPORTANT

This mark indicates instructions, which must be followed, or it 
leads to mechanical failure, breakdown, or damage.

 NOTE

This mark indicates hints or directions useful in the use of the 
product.

Contents

  1.  Parts location ...................................................2
  2.  Specifications ...................................................3
  3.  Warning labels on the machine .......................3
  4.  Symbols on the machine ..................................3
  5.  For safe operation ............................................4
  6.  Set up ...............................................................7
  7.  Fuel and chain oil .............................................9
  8.  Operation .......................................................10
  9.  Maintenance ..................................................12
  10.  Storage ...........................................................15
  11.  Disposal .........................................................15
  12.  Troubleshooting guide ...................................16

  1.  Loop handle

  2.  Suspension point

  3.  Stop switch

  4.  Throttle cable

  5.  Throttle trigger

  6.  Shaft tube

  7.  Knob bolt

  8.  Starter knob

  9.  Fuel tank

 10.  Primer

 11.  Choke lever

 12.  Air cleaner cover

 13.  Guide bar

 14.  Saw chain

 15.  Chain cover

 16.  Transmission

 17.  Guide bar cover

 18.  Hexagon socket 

(S16/S19) with torx 

driver

 19.  Wrench

 20.  Screw driver

 21.  Harness

 22.  Goggles

 23.  Owners’ manual

01-PSJ2310_GB_209_三.indd   2

12.9.12   1:09:21 PM

Содержание PSJ2310

















Отзывы: