GB-7
G3000
G
B
2. Explanation of Symbols on the Machine
The port to refuel “MIX GASOLINE”
Position:
Fuel cap
The port to top up chain oil
Position: Oil cap
The indication regarding the switch.
Flipping the engine switch to the “O” (STOP) direction, the engine stops.
Position:
upper part of the unit
The indication regarding the choke.
Pulling out the choke knob, the choke closes.
Position:
front of the chain cover
The screw under the “H” stamp is The High-speed adjustment screw.
The screw under the “L” stamp is The Slow-speed adjustment screw.
The screw at the left of the “T” stamp is the Idle adjustment screw.
Position:
Left side of the rear handle
For safe operation and maintenance, symbols are carved in relief on the machine.
According to these indications, please be careful not to make any mistake.
WARNING
