Zenoah FMZ 1200, Руководство по ремонту, Страница: 31 / 47

English – 31
Repair instructions
6.15 Assembling the pivoting rear
axle
3
2
1
1
Slide the washer (2) on the pendulum shaft with
the beveled edge against the fork (1) of the
pendulum shaft.
2
Grease the shaft and assemble it in the front
frame.
3
Slide the ring (3) on from behind and fasten the
screw.
4
Roll the rear carriage forward and fit it into the
fork of the pendulum shaft.
5
Fit the articulated shaft with the short key grip
and plastic cover face down. Ensure the double
D shaft is inserted into the double D hole on the
fork.
6
Fasten the cables in their respective positions
between the front and the rear carriage.
7
Fit the wheels.
8
Assemble according to "Replacing the Articulated
Steering Bearings", reverse order.
Make sure that the cables and controls are
properly adjusted (see Checking and Adjusting
the respective cables).