background image

18

English

4. SET UP

CHARGING THE BATTERY

• Be sure to charge the battery using the dedicated

charger and AC adapter associated with this
product.

• If the charger is damaged, do not use it.
• If battery fluid gets in your eye, wash it away with

clean water without rubbing your eye, and consult
a doctor immediately.

• Do not disassemble or modify the battery.

• Be careful not to drop the battery or give any impact to

it. Do not use the battery if its case has broken.

• Do not disassemble or modify the battery.
• Be sure to use a socket for the dedicated AC220V

adapter as a power supply outlet. Using any other
socket might result in dangerous production of fire and
smoke.

• Do not pour water or seawater on the battery, and do

not put the battery in water. Do not take out or put in
the AC adapter with wet hands.

• Be careful not to drop the charger or give any impact to

it.

• Do not charge the battery in a humid place such as a

bathroom or in an open-air place exposed to rain.

• If battery fluid splashes on your skin or clothes, wash it

away with clean water immediately.

When you are not charging the battery, be sure to leave
the AC adapter unplugged from the power supply outlet.

• The battery packed with this product has not been

charged. Be sure to charge the battery before using
your unit.

• When charging the battery, do not place anything

inflammable such as fuel near the battery.

• To ensure safety when charging the battery, the

following conditions are applied to the location for
charging:
-  No exposure to direct sunlight or the elements
-  Adequate ventilation and little humidity
- No 

vibrations

-  Ambient temperature of 0 to 40°C
-  No strong magnetism or radiation
-  Level surface to ensure stable position of the

charger

- Little 

dust

-  No children or pets nearby

IMPORTANT

NOTE

WARNING

WARNING

■밧데리의 충전

●충전은 반드시 부속된 전용 충전기 및 AC어뎁터를 사

용해 주십시오.

●충전기가 손상된 경우에는 사용하지 마십시오.
●밧데리액이  눈에  들어갔을  경우,  비비지  말고  깨끗한 

물로 충분히 씻은 후, 바로 의사의 진찰을 받으시기 바
랍니다. 

●밧데리를 분해하거나 개조하지 마십시오. 

●밧데리를 떨어뜨리거나 충격을 가하지 마십시오. 또한, 

케이스가 파손된 밧데리는 사용하지 마십시오.

●충전기를 분해하거나 개조하지 마십시오. 
●전원은 반드시 AC 220V 전용 콘센트를 사용해 주십

시오. AC 220V이외의 콘센트를 사용하시면 발화·발
연의 우려가 있어 위험합니다.

●밧데리에  물을  끼얹거나  물속에  넣지  마십시오.  또한, 

젖은 손으로 AC어뎁터를 꽂거나 뽑지 마십시오.

●충전기를 떨어뜨리거나 충격을 가하지 마십시오.
●욕실 등 습기가 많은 곳이나, 실외의 빗물에 젖는 곳에

서는 충전하지 마십시오. 

●밧데리액이 피부나 의류에 부착되었을 경우, 바로 깨끗

한 물로 씻어 주십시오.

충전하지 않을때에는 반드시 AC어뎁터를 콘센트에서 뽑
아 주십시오.

●제품  개봉시,  밧데리는  충전되어  있지  않습니다.  작업

하기 전에 반드시 충전시킨 후 사용해 주십시오.

●충전 중에는 연료 등 인화성 물질을 근처에 두지 마십

시오.

●다음 조건을 고려하여 안전하게 충전해 주십시오.

•직사광선이나 비와 이슬이 들지 않는 곳
•통풍이 잘되고 습기가 적은 곳
•진동이 없는 곳
•주위온도가 0_40℃인 곳
•강력한 자기장이나 방사선이 없는 곳
•충전기를 놓았을 때 안정되는 평탄한 곳
•모래_먼지가 없는 곳
•어린 아이나 애완동물 등이 장난치지 않는 곳

Содержание BK2650DL-Hb

























































Отзывы: