BCZ5050DW
9
6. Set up
■
ENGINE
Using attached 4 socket screws, secure the connection
firmly with equal force.
■
HANDLE
1. Remove the upper cap(1) from the bracket.
2. Loosen the 4 bolts on the clamp and insert the
handles equally. Retighten the bolts.
3. Put the handle assembly into the bracket and put the
upper cap(1) over it. Tighten the cap securely.
■
CLAMP THE THROTTLE WIRE
Bind the throttle wire to shaft tube(1) by clamp(2).
■
BLADE GUARD
Attach the guard on the shaft tube. Fix it with 2 bolts.
■
BLADE
1. Put the angled bar(1) into the side holes of the inner
holder and the gearcase.
2. Remove the nut (Lefthanded) and the outer
holder(3) from the gearshaft.
3. Put the blade onto the inner holder(2). Make the
marked side face the holder.
4. Put the outer holder(3) onto the gearshaft making
the recessed side face the blade.
5. Fasten the blade by the nut and the cover(4).
[Tightening torque]
14.7 to 19.6 N·m (150 to 200 kg·cm)
