BCZ5050DW
7
5. For safe operation
using your whole hand. Place your feet
slightly apart (slightly further apart than
the width of your shoulders) so that
your weight is distributed evenly across
both legs, and always be sure to
maintain a steady , even posture while
working.
2. Keep cutting attachment below waist
level.
3. Maintain the speed of the engine at the
level required to perform cutting work,
and never raise the speed of the
engine above the level necessary.
4. If you detect abnormal vibration or
noise during operation, promptly stop
the product and check whether
something has broken. If a breakedown
has occurred, do not operate the
product until the problem is fixed.
5. Keep all parts of your body away from
rotating cutting attachment.
6. Guard against hazardous situations at
all times. Warn adults to keep pets and
children away from the area. Be careful
if you are approached. Injury may result
from flying debris.
7. If someone calls out or otherwise
interrupts you while working, always be
sure to turn off the engine before
turning around.
8. After using the product and other
equipment, CLEAN UP!
■
TRANSPORT
1. Drain the fuel from the fuel tank before
transporting or storing the product.
2. When hand-carrying the product, cover
over the cutting part, lift up the product
and carry it paying attention to the
blade.
3. Secure the unit carefully to prevent
movement when it is transported.
4. A unit that receives a strong shock
during transport and unloading may
malfunction.
■
FUEL SAFETY
1. Always use caution when handling fuel.
It is highly flammable. Wipe up all
spills, screw the fuel cap back tightly,
and then move the product at least 10
feet (3 meters) from the fueling point
before starting the engine.
2. Eliminate all sources of sparks or flame
(i.e. smoking, open flames, or work that
can cause sparks) in the areas where
fuel is mixed, poured, or stored.
3. Do not smoke while handling fuel or
while operating the product.
4. Do not refuel a hot engine.
5. Do not refuel a running engine.
6. Keep the handles dry, clean and free of
oil or fuel mixture.
7. Always store fuel in an approved
container designed for that purpose.
■
STORAGE
1. Always store the product and fuel so
that there is no risk of leakages or
fumes coming into contact with sparks
or naked flames from electrical
equipment, electric moters,
relays/switches, boilers and the like.
2. When storing the product, the fuel tank
should be emptied.
3. When storing the product, choose a
space indoors free from moisture and
out of the reach of children.
■
AVOID NOISE PROBLEM
Check and follow the local regulations as
to sound level and hours of operations for
the product.
1. Operate power equipment only at
reasonable hours not early in the
morning or late at night when people
might be disturbed. Comply with times
listed in local ordinances.
2. To reduce sound levels, limit the
number of pieces of equipment used at
any one time.
3. Operate the product at the lowest
possible throttle speed to do the job.
4. Check your equipment before
operation, especially the muffler, air
intakes and air filters.
■
FOR PROTECTING YOUR BODY
FROM VIBRATION
Prolonged use of the product,
exposing the operater to vibrations
WARNING
IMPORTANT
