BCZ5050DW
6
5. For safe operation
persons, care should also be taken to
constantly look around or otherwise
check for the presence and locations of
other people working so as to maintain
a distance between each person
sufficient to ensure safety.
6. Avoid using the product where stable
footing and balance are not assured.
7. All product service, other than the items
listed in the Owner's Manual, should be
performed by competent service
personnel.
8. Always shut off the engine before
setting it down.
9. Start the engine only in well ventilated
areas. Never start or run the engine
inside a closed room or building and
potentially explosive atmosphere.
Exhaust fumes contain dangerous
carbon monoxide.
10. Never to touch the spark plug or plug
cord while the engine is in operation
Doing so may result in being
subjected to an electrical shock.
11.Never to touch the muffler, spark plug,
other metallic parts of the engine or
engine cover while the engine is in
operation or immediately after shutting
down the engine. These metallic parts
and engine cover reach high
temperatures during operation and
doing so could result in serious burns.
12.To reduce the risk of injury associated
with contacting rotating parts, stop the
engine before installing or removing
attachments. Always disconnect the
spark plug before performing
maintenance or accessing movable
parts.
■
BEFORE USE
1. Each time before starting the engine,
inspect the entire unit to see if every
part is in good order and is securely
tightened in place. If any damage is
found in the fuel line, the exhaust line,
or the ignition wiring, do not use the
product until it has been repaired.
2. Before starting operation, always
make sure that the cutting
attachment and the debris guard are
WARNING
properly installed and securely
fastened.
3. Check the condition of working area to
avoid any accident by hitting hidden
obstacles such as stumps, stones,
cans, or broken grass.
Remove any obstacle before beginning
work.
■
STARTING THE ENGINE
1. Keep bystanders and animals at least
50 feet (15 meters) away from the
operating point. If you are approached,
immediately stop the engine.
2. The product is equipped with
centrifugal clutch mechanism, so the
cutting attachment could rotate as soon
as the engine is started. When starting
the engine, place the product onto the
ground in a flat clear area and hold it
firmly in place so as to ensure that
neither the cutting part nor the throttle
come into contact with any obstacle
when the engine starts.
Make sure the throttle is at idle
position. Never place the throttle into
the high speed position or half throttle
position (throttle lock position) when
starting the engine.
3. After starting the engine, check to
make sure that the cutting attachment
stops rotating when the throttle is
moved fully back to its original position
(idle position). If it continues to rotate
even after the throttle has been moved
fully back, turn off the engine and take
the unit to your authorized ZENOAH
servicing dealer for repair.
■
USING THE PRODUCT
Cut only materials recommended by the
manufacturer. And use only for tasks
explained in the manual.
1. Grip the handles firmly with both hands
IMPORTANT
WARNING
IMPORTANT
