10
5. Set up
■
INSTALLING THE ANTI-CAUGHT UP COVER FOR
METAL BLADE (F7)
1. Match the inside ditch of the anti-caught up cover to
the outside projection of the gear case and push it in
until it touches the stopper..
2. Tighten the screw on the cover front.
❈
This cover is needed if you use the metal blade.
(1) Anti-Caught
Up Cover
(2) Stopper
(3) Gear case
■
SWIVEL LOCK
This brushcutter is equipped with the swivel lock to fix
the hanger and the main pipe at the optional position.
(F8)
• In the ordinary operation, use it with the wing nut of
the hanger front loose (unlocked).
• In transportation, please tighten the wing nut when it
is necessary to fix the main pipe.
(1) Wing nut
(2) Loose (unlock)
(3) Lock
F7
F8
■
INSTALLING THE METAL BLADE (OPTION) (F9)
1. Set the inner holder to the gear shaft, and turn to fix
with the attached L-shaped bar.
2. Put the blade on the inner holder with the face with
letters to the gear case, and match correctly the hole
of the blade to the projection of the inner holder.
3. Set the outer holder to the gear shaft with the
hollowed face to the blade.
4. Put the attached bolt cover on the outer holder and
secure it with the bolt (left screw) together with the
spring washer and the washer.
(1) Bolt
(2) Spring Washer
(3) Washer
(4) Bolt cover
(5) Outer holder
(6) Blade
(7) Gear shaft
(8) Bar
(9) Inner holder
(10) Gear case
■
INSTALLING THE NYLON CUTTER (F10)
1. Set correctly the inner holder and the outer holder to
the gear shaft.
2. Screw the attached bold (M8 Left) into the gear shaft
and secure it with the spanner.
3. Screw the nylon cutter into the bolt by fixing the inner
holder with the L-shaped bar and tighten it manually.
Keep bolts and washers to install the blade carefully so
as not to lose them.
(1) Inner holder
(2) Outer holder
(3) Bolt
(4) Nylon cutter
(5) Nylon cord
NOTE
F9
F10