Zennio KNX-IP Router / Interface PLess
http://www.zennio.com
Technical Support:
http://support.zennio.com
20
Vector Graphics) format.
Figure 10
Web interface (KNX bus load)
2.6.2.1
ADDICIONAL INDIVIDUAL ADDRESSES (TUNNELING ADDRESSES)
Zennio KNX-IP Router / Interface PLess requires a specific individual address when
acting as a programming interface (
tunneling
) other than the address of the device
itself. Up to four simultaneous connections are possible, which implies that up to four
different individual addresses must be configured. When a tunneling address are being
used, the IP address that makes use of it is displayed.
The “KNX” tab in the web interface shows the four tunneling individual addresses
currently configured.
Figure 11
Set tunneling addresses in web interface.
The first tunneling address must be set in ETS as shown in Figure 12 for ETS4 or in
Figure 13 for ETS5. The following three addresses are automatically set with values
consecutive to the first.
