Zennio MINiBOX 0-10V X1, Руководство пользователя

Страница: 4 / 25

MINiBOX 0-10V X3/X2/X1
https://www.zennio.com Technical Support: https://support.zennio.com
4
1 INTRODUCTION
1.1 MINiBOX 0-10V X3/X2/X1
MINiBOX 0-10V from Zennio is a KNX actuator that aims at fulfilling the climate control
needs of KNX environments with integrated fan coil units consisting of two or four
pipes , where the valves in the pipes and the fan are controlled through analog 0-10
VDC signals .
This document describes the three versions of the device: MINiBOX 0-10V X3 (3
channels) / MINiBOX 0-10V X2 (2 channels) / MINiBOX 0-10V X1 (1 channel) and all
their characteristics will be mentioned respectively and following this order along the
entire document.
3 / 2 / 1 fan coil analog modules to control 2 and 4 pipes units with 0-10V fan
or valves.
3 / 2 / 1 independent 0-10V analog voltage outputs configurable as fan or
valve of a fan coil unit or other adjustable load between these voltage levels.
3 / 2 / 1 independent analog inputs capable of measuring voltage
(0…1V,
0…10V or 1…10V) and
current
(0…20mA or 4…20mA) signals.
3 / 2 / 1 independent thermostats .
10 customisable, multi-operation logic functions .
Manual operation / supervision of the outputs 0-10V through the on-board
pushbuttons and LEDs.
Heartbeat or periodical
“still-alive” notification.