Zennio Linecoupler ZN1SY-LCTP, Руководство пользователя

Страница: 18 / 22

Zennio Linecoupler
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
18
4 ETS PARAMETERISATION (LINEREPEATER)
To begin with the parameterisation process of the device, it is necessary, once the ETS
program has been opened, to import the database of the product (
Linerepeater
application program).
Figure 12
Properties of the Linerepeater Application Program
Next, the device should be added to the project where desired. And then, one right-
click on the device will permit selecting "Edit parameters", in order to start the
configuration.
In the following sections a detailed explanation can be found about each of the different
parameters of the device.
4.1 DEFAULT PARAMETERISATION
When entering the parameter edition of Zennio Linecoupler for the first time, a window
similar to Figure 13 will be shown, where three main tabs are available:
General , Main
line
and
Line
. Note that this application program does not implement communication
objects.
Figure 13 General