KLIC-MITT v2
Technical Support:
4
1
INTRODUCTION
KLIC-MITT V2
KLIC-MITT v2
from Zennio
is a new gateway that provides full-duplex
communication
between the KNX home automation system and
Mitsubishi
Electric air-conditioning
systems through the IT Terminal interface provided by the latter. KLIC-MITT v2 adds
component improvements and electrical safety over the previous KLIC-MITT.
Because of this
bidirectional
communication, the air conditioning system can be
controlled from the home automation system in the same manner as it is through its
own controls. Moreover, the actual status of the unit can be monitored and periodically
sent to the KNX bus to inform other devices.
The most outstanding features of KLIC-MITT v2 are:
Bidirectional control of Mitsubishi Electric HVAC units through their
IT
Terminal connector
(CN105/CN92).
Control of the main functions of the A/C unit: On/Off, temperature, mode of
operation, fan speed, position of the flaps, etc.
Error management
to handle specific error codes from the A/C unit itself as
well as any communication issues that may arise.
Up to
five scenes
.
Two analogue-digital inputs
, for the connection of temperature probes,
motion detectors or binary pushbuttons or switches.
10 customisable, multi-operation
logic functions
.
Heartbeat
or periodic “still-alive” notification.
