Zennio KLIC-FJ, Руководство пользователя

Страница: 8 / 37

KLIC-FJ
https://www.zennio.com/ Technical Support: https://support.zennio.com
8
Heartbeat (Periodical Alive Notification) : this parameter lets the integrator
incorporate a 1-B
it object to the project (“ [Heartbeat] Object to Send ‘1’ ”) that
will be sent periodically with value “1” to notify that the device is still working (
still
alive ).
Note : The first sending after download or bus failure takes place with a delay
of up to 255 seconds, to prevent bus overload. The following sendings match
the period set .
Regardless of the above parameters, the following objects are available by default:
“
[AC] On/Off
” and “
[AC] On/Off (Status)
”: allow switching on (value “1”) and off
(value “0”) the A/C unit or reading the current status, respectively.
“
[AC] Temperature Setpoint
” and “
[AC] Temperature Setpoint (Status)
”: allow
setting the desired temperature setpoint or reading the current value,
respectively. See section 2.4.1 for further options.
“
[AC] Mode
” and “
[AC] Mode (Status)
”: allow setting the desired operation mode
(either Automatic, Heating, Cooling, Fan or Dry) or reading the current mode,
respectively. See section 2.4.1 for further options.
“
[AC]
Speed: Percentage Control” and “
[AC] Speed: Percentage Control
(Status)
”: allow establishing desired fan speed. See section 2.4.2 for further
options.
Several error objects . See section 2.4.6.
“
[AC]
Operating Time”:
time in hours that the A/C unit has been working. See
section 2.4.1 for further options.
Figure 4. Heartbeat.