Zennio KLIC-FJ, Руководство пользователя

Страница: 16 / 37

KLIC-FJ
https://www.zennio.com/ Technical Support: https://support.zennio.com
16
“[AA] Mode (status)”
: 1-Byte object which allows knowing the A/C unit
operating mode status.
Object Value A/C unit mode
0 Auto
1 Heating
3 Cooling
9 Fan only
14 Dry
Table 1. A/C unit operating modes.
Additionally, a simplified mode can be configured to select Cooling and Heating mode.
Simplified Mode
: in addition to the “
Mode
” and “
Mode (Status)
” 1-Byte
objects, available by default, it is possible to commute and to verify the current
operation mode through the following 1-Bit objects, which get enabled after
activating this parameter:
➢ “
Simplified Mode
”, which allows switching to the Cooling mode by
sending it a “0” and to the Heating mode by sending it a “1”.
➢ “
Simplified Mode (Status)
”, which will send a value of “0” when the
mode switches to Co
oling or to Dry, or a value of “1” when it switches to
Heating. Fan and Automatic mode are not reflected in the value of this
object.
VENTILATION
This function allows configuring ventilation controls. The options available are:
Speeds : enabled by default, due to all A/C unit includes it. See section 2.4.2.
Flaps : enables the fan flaps function. See section 2.4.3.
Figure 10. A/C Gateway. Configuration. Fan.