Zennio KLIC-FJ, Руководство пользователя

Страница: 15 / 37

KLIC-FJ
https://www.zennio.com/ Technical Support: https://support.zennio.com
15
remove the power supply from the installation, connect/disconnect the wired control and,
subsequently, recover installation power would be simply enough.
ERROR TYPE CONFIGURATION
Depending on the model of A/C unit, Fujitsu define two error types :
“Type A ":
➢
RAC non-inverter units.
➢
RAC inverter units (till Typ A models).
➢
VRF J, S & V-series units.
“Type B":
➢
RAC inverter units (new Typ G models).
➢
VRF J, S & V-series units.
Important : KLIC-FJ must be configured selecting the error type which correspond with
A/C unit .
OPERATION MODES
KLIC-FJ allows controlling the A/C unit operating mode through the following objects,
available by default:
“[AC] Mode”
: 1-Byte object which allows selecting the A/C unit operation
mode. There will be only taken in account values that are appropriated with
some of available modes in Fujitsu units, which are represented in
Table 1.
Figure 8. A/C Gateway. Configuration. Error type configuration.
Figure 9. A/C Gateway. Configuration. Operation modes.