KES Plus
http://www.zennio.com
Technical Support:
http://support.zennio.com
31
Sending Mode for Voltage
[
Disabled /
Periodic
/ With Value Change /
Periodic and with Value Change
]: analogous to the same parameter in the tab
“Phase
n
” (see section 2.2.2.2).
Sending Mode for Current
[
Disabled /
Periodic
/ With Value Change /
Periodic and with Value Change
]: parameter analogous to the same
described in the tab “Phase
n
” (see section 2.2.2.2).
Sending Mode for Power
[
Disabled /
Periodic
/ With Value Change /
Periodic and with Value Change
]: parameter analogous to the same
described in t
he tab “Global” (see section 2.2.2.1).
Show Phase Objects (Voltage and Current)
[
enabled
/disabled
]: show or
hide the following objects of the phase n.
➢
[Phn] Voltage.
➢
[Phn] Current.
2.2.3.1.1
Total register
Analogous to the total registers of the phases of a single-phase system (see section
2.2.2.2.1).
2.2.3.1.2
Partial register
Analogous to the partial registers of the phases of a single-phase system (see section
2.2.2.2.2) with one more parameter:
Periodic Reset
[
enabled/
disabled
]: enables or disables the automatic reset of
the partial register when a certain period expires:
➢
Period
[
1
...255
] [
Day /
Month
]
: when selecting “month” a new parameter
appears:
•
Day of Reset
[
First Day of Month
/ Same Day of Month
]: in case the
above period has been set in terms of months, sets when the reset
should take place, taking into account the day the device starts working.
Please note the following:
➢
In the absence of bus power at the end of the cycle, the register will be
reset after power recovery.
