KES Plus
http://www.zennio.com
Technical Support:
http://support.zennio.com
29
Sending Mode for Energy
[
Disabled /
Periodic
/ With Value Change /
Periodic and with Value Change
]: analogous to the same parameter of the
global registers (see section 2.2.2.1.1).
2.2.2.2.2
Partial register
They are equivalent to partial records of global magnitudes (see section 2.2.2.1.2), but
in this case, they store single-phase data.
ETS PARAMETERISATION
The parameters to configure any of the partial registers are:
Figure 19
Phases: Phase y - Partial Register
Energy Value after Download
[
Keep Current Value /
Set Value
]: ]: sets the
initial value of the total register of
active energy
after an ETS download.
When selecting “Set value”, and additional textbox appear to enter the desired
value for both
Consumed energy
and
Generated energy
, in terms of the
selected measurement units.
Sending Mode for Energy
[
Disabled /
Periodic
/ With Value Change /
Periodic and with Value Change
]: analogous to the same parameter of the
global registers (see section 2.2.2.1.1).
