ZENN
iO
AVANCE Y TECNOLOGÍA
www.zennio.com
12
2.2.5. REMOTE CONTROLLER
This parameter allows enabling the zones of the remote controller and
associate each of them to either any of both Home 1 or Home 2 pages, to
control them remotely.
Zone 1:
To enable and associate this IR controller zone to any of the
Home or Home 2 pages.
Zone 2:
To enable and associate this IR controller zone to any of the
Home or Home 2 pages.
Note I:
Buttons arrangement on the remote controller is similar to the “Home &
Home 2” boxes structure to make its control easier.
Note II:
If remote controller is disabled in the parameterization, a press key over
any button
DOES NOT
have effect in the touch panel.
2.2.6. TEMPERATURE SENSOR CALIBRATION
Allow recalibrating the Temperature Sensor referred to the own temperature
measured by the sensor itself when the calibration parameter remains
unchanged (value “0”).
Zone 1
Zone 2
