inBOX 24 vT / inBOX 20 vT
Technical Support:
7
2
CONFIGURATION
2.1
GENERAL
After importing the corresponding database in ETS and adding the device into the
topology of the desired project, the configuration process begins by entering the
Parameters tab of the device.
ETS PARAMETERISATION
From the General screen it is possible to activate/deactivate all the required
functionality.
Figure 2.
Default screen
Once activated,
Inputs
(only on inBOX 24 vT),
Outputs, Logic Functions,
Thermostats
(only on inBOX 24 vT)
, Master Light
(only on inBOX 24 vT),
Scene Temporisation
and
Manual Control
bring additional tabs to the menu
on the left. These functions and their parameters will be explained in later
sections of this document.
The
Manual Control
function is enabled by default, and so is the
corresponding configuration tab.
