Zennio FlatSensato, Руководство пользователя

Страница: 19 / 27

Flat Sensato
http://www.zennio.com Technical Support: http://support.zennio.com
19
2.6.1 BINARY INPUTS
Please refer to the “
Binary Inputs
” user manual, available in the Flat Sensato product
section, at the Zennio website ( www.zennio.com ).
2.6.2 TEMPERATURE PROBE
Please refer to the “
Temperature Probe
” user manual, available in the Flat Sensato
product section, at the Zennio website ( www.zennio.com ).
2.6.3 MOTION DETECTOR
It is possible to connect motion detectors (models ZN1IO-DETEC-P and ZN1IO-
DETEC-X from Zennio) to the input ports of Flat Sensato.
Please refer to the “
Motion Detector
” user manual, available in the Flat Sensato
product section, at the Zennio website ( www.zennio.com ).
Notes:
The ZN1IO-DETEC-P motion detector is compatible with a variety of Zennio
devices. However, depending on the device it is actually being connected to,
the functionality may differ slightly. Therefore, please refer specifically to the
corresponding product section to obtain the aforementioned document.
Motion detectors with references ZN1IO-DETEC and ZN1IO-DETEC-N are
not compatible with Flat Sensato (may report inaccurate measurements if
connected to this device).
When connected to Flat Sensato, the rear micro-switch of model ZN1IO-
DETEC-
P should be set to position “
Type B
”.