BIN 44 / 4X / 2X
http://www.zennio.com
Technical Support:
http://support.zennio.com
6
1.2
INSTALLATION
BIN is connected to the KNX bus through the incorporated terminal connector, while
the input lines are connected to BIN through a screw terminal block, bundled with the
stripped cables already connected.
Once the device is provided with power from the KNX bus, both the individual address
and the associated application program may be downloaded.
This device does not need any additional external power since it is entirely powered
through the KNX bus.
Figure 1.
Element diagram.
The main elements are described next:
Prog./Test Button (2)
: a short press on this button sets the device into the
programming mode, making the associated LED (3) light in red. If this button is
held at the same time of applying bus power to the device, BIN will enter the
Safe Mode. In such case, the LED will intermit in red.
Slots for the input / output lines
: slot for the insertion of the terminal block
with cables (see Figure 2) that permits BIN interfacing with the different input
and output elements.
Figure 2.
Input / output terminal block
1.- Slots for the input / output channels
2.- Programming button
3.- Programming LED
4.- KNX
3
2
4
1