Zennio BIN 44, Руководство пользователя, Страница: 14 / 20

BIN 44 / 4X / 2X
http://www.zennio.com Technical Support: http://support.zennio.com
14
Enable Flashing [ enabled/ disabled ]: enables the flashing function.
➢
On Duration [
1…
5
…255
]:
length of each “on” stage.
➢
Off Duration [
1…
5
…255
]:
length of each “on” stage.
The following objects are also related to the functionality of each LED output:
“
[LEDx] On/Off
” (binary): when it receives the value “1”, the LED will switch
to the on state, while the value “0” will switch it off.
“
[LEDx] Inverted On/Off
” (binary): performs an inverse control of the LED.
When it receives the value “0”, the LED will switch to the on state, while the
value “1” will switch it off.
“
[LEDx] Timer
” (binary): when it receives the value “1”, the LED timer
function will start, while the value “0” will stop it.
“
[LEDx] Flashing
” (binary): when it receives the value “1”, the LED flashing
function will trigger, while the value “0” will stop it.
2.2.5 ELECTRONIC RELAY CONTROL (HEATING ACTUATOR)
Please refer to “
Electronic Relay Control in Heating Systems
” specific manual,
available in the BIN product section at the Zennio website, http://www.zennio.com .
Note : BIN does not implement the following options, although they are included in the
above document:
Overload/short-circuit notification.
Start-up delay (the general start-up delay is applied instead; see section 2.1).
.