BIN 44 / 4X / 2X
http://www.zennio.com
Technical Support:
http://support.zennio.com
12
In case of enabling the night mode, some more options can be configured:
Figure 7.
LED Ouputs - General Configuration - Night Mode
Brightness Mode after ETS download
[
Normal
/Night
]: sets which of the two
modes will be active after an ETS Download.
1-bit Object
[
enabled
/disabled
]: when marked, it will be possible to switch the
mode by writing to a binary object (“
[LED] Brightness Mode
”). The
parameter
Value
([
0 = Normal; 1 = Night
/ 0 = Night; 1 = Normal
]) will show
up to select which value should trigger which mode.
Scene Object
[
enabled/
disabled
]: when marked, it will be possible to switch
the mode by writing a certain scene value to “
[LED] Scene
”. Two specific
textboxes will show up to enter what scenes (1 through 64) will trigger each
mode.