AudioInRoom
http://www.zennio.com
Technical Support:
http://support.zennio.com
10
2.
CONFIGURATION
After importing the corresponding database in ETS and adding the device into the
topology of the desired project, the configuration process begins by entering
Parameters
screen
.
2.1
GENERAL
From this screen the two main functions of AudioInRoom,
Heartbeat
and
Bluetooth
Module
, can be enabled.
ETS PARAMETERISATION
The configurable parameters on the General screen are the following:
Figure 5.
General Configuration.
Heartbeat (Periodic Alive Notification)
[
disabled
/enabled
]
1
: incorporates a
one-
bit object to the project (“
[Heartbeat] Object to Send ‘1’
”) that will be
sent periodically with a value of “1” to notify that the device is still working (still
alive
).
Figure 6.
Heartbeat (Periodic Alive Notification).
1
The default values of each parameter will be highlighted in blue in this document, as follows:
[
default
/rest of options
].
