NOTE:
If tubes separate, reinsert the
INNER TUBE
into the
OUTER TUBE
with the white plastic
spiral opposite the transition ring. Slide the inner tube until it extends more than halfway
out past the transition ring, as shown below.
Pg 9 of 28
1-800-892-3986 IS02157-I3
3-1.
Place the other end cap (E) onto the spring tube set (A).
NOTE: ASSEMBLE ON THE FLOOR.
(spring tube set)
E
A
4-1. Check that the twist tube (B) can easily slide up and down. NOTE:
If needed, loosen the
twist tube (B) by twisting the
OUTER
tube
COUNTER CLOCKWISE
, be sure the white plastic
spiral is covered by the
OUTER
tube.
NOTE: ASSEMBLE ON THE FLOOR.
inner
tube
loosen
B
A
STEP 3
STEP 4
B
tapered end at the bottom
transition ring
cam nut needs to be
all the way down.
white
plastic spiral
outer
tube
correct twist tube (B) assembly
