Installation
9
Audio Connection to Optional
Equipment
Connect the DVD player to your optional
equipment for audio output.
Amplifier equipped with 2-channel ana-
log stereo or Dolby Pro Logic ll / Pro
Logic
Connect the left and right AUDIO OUT-
PUT jacks on the DVD player to the audio
left and right IN jacks on your amplifier,
receiver, or stereo system, using the audio
cables
(A)
.
Amplifier equipped with 2-channel digital
stereo (PCM) or audio / video receiver
equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS)
Connect one of the DVD Player’s DIGITAL
AUDIO OUTPUT jacks (COAXIAL
X
) to
the corresponding in jack on your amplifi-
er. Use an optional digital (coaxial
X
)
audio cable.
Digital Multi-channel sound
A digital multi-channel connection provides
the best sound quality. For this you need a
multi-channel audio / video receiver that
supports one or more of the audio formats
supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check
the receiver manual and the logos on the
front of the receiver.
Rear of DVD player
Amplifier (Receiver)
X
A
• If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver produces a strong, distorted sound or
no sound at all.
• Six Channel Digital Surround Sound via a digi-
tal connection can only be obtained if your
receiver is equipped with a Digital Multi-chan-
nel decoder.
Note
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and
the double-D symbol are trademarks of
Dolby Laboratories.
DTS and DTS Digital Out are trademarks
of Digital Theater Systems, Inc.
DV235-NC.HA1CLZS-ENG 4/10/07 11:19 AM Page 9
