![background image](http://html1.mh-extra.com/html/zenith/z52dc2d/z52dc2d_installation-and-operating-manual_3584520006.webp)
6 DLP Projection TV
- This is a representation of the front panel of models Z56DC1D, Z62DC1D series TVs.
- Here shown may be somewhat different from your TV.
Controls
Controls
Front Panel Controls
Front Panel Controls
INPUT
VOL
CH
ENTER
MENU
POWER Button
VOLUME (
F
F
,
G
G
) Buttons
CHANNEL (
E
E
,
D
D
) Buttons
MENU Button
INPUT Button
ENTER Button
- Lamp indicator, operation indicator, and temperature indicator located below the front panel controls, reveal the-
operating status of the DLP projection TV.
Function Status Indicators
Function Status Indicators
Off
Power Cord is not connected.
Red
Power Cord is connected, TV is in standby mode.
Green
TV turns on.
Orange (blinking)
Preparing operation in standby mode.
Orange
Projection lamp is reaching the end of its life and needs to
be replaced with a new lamp. Contact your service center.
Red (blinking)
There is a problem with the lamp or around it. Contact an
authorized service center.
Green (blinking)
The lamp cover is not closed.
Orange
The projection TV is overheating. Check the blocked vents
of the Projection TV .
Red
The projection TV shuts down due to overheating.
Red (blinking)
The projection TV shuts down, check the cooling fan.
Contact your service center.
Operation Indicator
Lamp Indicator
Temperature Indicator
Operation Indicator/
Lamp Indicator/
Temperature Indicator