O P E R AT I O N
P A G E 3 1
Recording
using preset
time periods.
Instant Recording
Remote's Controls
power
tv/vcr
sp/ep
stop
rec/itr
VCR's Controls
sp/ep
rec/itr
stop/eject
power
Presses of
Display
Preset Time For
REC/ITR
Recording
1 (Press)
Current Time
Until end of tape
2
0:30
30 minutes
3
1:00
1 hours
4
1:30
1 hour and
30 minutes
5
2:00
2 hours
.
.
.
.
.
.
.
.
.
9
4:00
4 hours
10
No display
normal recording
Preset Time Periods for ITR Recording.
Note:
Preset recording time counts down until the record-
ing time is over.
Instant (attended) Timer Recording (ITR) lets you
record where you record for a specific preset time
period, instead of recording until the end of tape is
reached. For example, you can record a 30-minute
show using the preset time period.
Turn TV and VCR on.
Place VCR in VCR mode by pressing
TV/VCR on the remote repeatedly until
the
symbol appears in the VCR
front panel.
Select channel 3 or 4 at the TV. If you
have connected your VCR to the TV’s
A/V input jacks, select the A/V source
at the TV for a better picture.
Select the channel to be watched and
recorded at the VCR. If you have a
cable box, select the cable box output
channel (usually 3 or 4) at the VCR.
Select cable box channels at the cable
box.
Insert a VHS cassette tape into the
VCR.
Press SP/EP to select recording speed,
if desired. Recording speed is always
SP, unless you select EP.
Press REC/ITR until recording begins.
The REC CH_ appears in the VCR front
panel. Recording continues until you
reach the end of the tape, or until you
press STOP to stop recording.
Press REC/ITR repeatedly to select a
preset recording time period. Each sub-
sequent press of REC/ITR increases the
recording time by 30 minutes until you
reach a maximum of 4 hours.
VCR
2
3
4
1
5
6
7
8
Note:
The SP mode determines how much tape is
left and switches speed from SP to EP, if necessary,
to complete recording the program. There will be
some picture and sound distortion at the point of
the speed change.
