Zenith RC59000M, Инструкция по установке и эксплуатации

Страница: 15 / 56

DVR HOOKUP
15
Connections (Continued)
Connecting to a TV
Make one of the following connections, depending on
the capabilities of your existing equipment.
RF coaxial connection
Connect the RF.OUT jack on the DVD+VCR to the
antenna in jack on the TV using the 75-ohm Coaxial
Cable supplied
(R) .
ote
If you use this connection, tune the TV to the
DVD+VCR’s RF output channel (CH 3 or 4).
How to set the DVD+VCR ’ s RF output channel
When the DVD+VCR is turned off, press and hold
CH/PRESET (
v
/
V
) on the front panel for about five
seconds to change the RF output channel (CH 03 or
CH 04). “RF 03” or “RF 04” appears in the display win-
dow.
Audio/Video connection
11
Connect the VIDEO OUT jack on the VCR/DVD
Recorder to the video in jack on the TV using the
video cable
(V) .
22
Connect the Left and Right AUDIO OUT jacks from
the VCR/DVD Recorder to the audio left/right in
jacks from the TV using the audio cables
(A) .
S-Video connection
11
Connect the S-VIDEO OUT jack on the VCR/DVD
Recorder to the S-Video in jack on the TV using the
S-Video cable
(S) .
22
Connect the Left and Right AUDIO OUT jacks from
the VCR/DVD Recorder to the audio left/right in
jacks on the TV using the audio cables
(A) .
Component Video (Color Stream
®
) connection
11
Connect the COMPONENT VIDEO OUT jacks on
the VCR/DVD Recorder to the corresponding in
jacks on the TV using an Y Pb Pr cable
(C) .
22
Connect the Left and Right AUDIO OUT jacks from
the VCR/DVD Recorder to the audio left/right in
jacks on the TV using the audio cables
(A) .
Progressive Scan (ColorStream ® pro) connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the VCR/DVD
Recorder’s progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the VCR/DVD Recorder.
11
Connect the COMPONENT VIDEO OUT jacks on
the VCR/DVD Recorder to the corresponding in
jacks on the TV using an optional Y Pb Pr cable
(C) .
22
Connect the Left and Right AUDIO OUT jacks from
the VCR/DVD Recorder to the audio left/right in
jacks on the TV using the supplied audio cables
(A) .
otes
– Set Progressive Scan option to “ON” in the General
menu, see page 20.
– Progressive scan does not work with the analog video
connection (yellow VIDEO OUT jack).
ANTENNA
INPUT
L R
Y Pb Pr
COMPONENT VIDEO INPUT
AUDIO INPUT
VIDEO
INPUT
S-VIDEO
INPUT
R
Rear of TV
Rear of VCR/DVD Recorder
S A V C